Adhesive Powder Factory Price White Hot Melt Powder for DTF Heat Transfer Printing
Heat Transfer Powder
PU Powder，Good Health is the Best.
1.100% of ink absorption,
2.The powder is clean,
3.The designs are brightly coloured,
4.It feels soft.
5.Spot second delivery.
1 kg/bag，Accept Your Special Demands, Let You Save Time and Worries.
1KG , one bag
By Air or Sea. We are High-Level Contracted Partner of DHL, Fedex, UPS and Other International Expres Companies. Make the Goods Quickly, Efficiently and Low Cost to Reach Your Hands.
0# super fine powder. for best hand feeling. but not good for fastness.suggest for someone like DTG.
1# fine powder. for good hand feeling .good transform and good fastness. suggest for good requirement T-shirt.
2# normal powder. for normal hand feeling. normal transform and good fastness. suggest for normal T-shirt.
3# Coarse powder. for best fastness. normal hand feel. suggest for Brand LOGO.Autumn and winter clothing
5# Jeans powder. for best fastness for jeans and Washing label，hard hand feeling.
6# lower temperature powder. for avoid the proyester second times sublimation. heat press at about 110 degree
It is thermoplastic hot melt adhesive made of imported PU. Medium melt point and Meso-Cellulite, soft, good viscous, good fastness after washing, good endurance, good solution resistance, suitable for double points dusting process, and bonding process of lining cloth.
DTF powder is specially used for DTF printing. Our powder has excellent adhesion, excellent washability, and can accurately adhere to ink rather than film.
This powder can be cured at 150C or 300F and pressed for 10-20 seconds. Press the completed transfer again for 10 seconds, and put a piece of parchment paper on it to get a better feel.
This powder can be cured in an oven using a hot air gun or under a hot press.
Process to using the powder:
1. Place the transfer paper on a hot-pressed pillow or hot-pressed foam.
2. Lower the top heating plate until it is about 1 cm away from the transfer.
3. Solidify the powder at 160C for about 2 minutes or until melted. At first it will become sparkling. Then it will melt and form a flat surface.